Magnatrac HYDRO 4800 Specifications

Click Here to download 4 page color brochure (~375K)

A - 54-1/4"

B - 57"

C - 43"

D - 15-1/4"

E - 48-7/8"

F - 9-1/2"

G - 6"

Engine	25HP Kohler, 'V' twin cylinders, electric start, 15 amp alternator, pressure lubrication with filter
Gas Tank	Remote with fuel pump, 1 gal. capacity
Track Drive Pump	0.775 cubic inch displacement, 12.08 GPM @ 3600 RPM
Attachment Pump	not available
Max Engine Torque	39.5 Ft. Lbs @ 2400 RPM
Hydraulic Oil Cooler	Internally mounted, engine fan cooled, cools Attachment hydraulic oil only, rated 10.7 GPM (optional electric booster fan available)
Attachment Valve	Attachment hydraulics optional
Approximate Speeds	Regular Drive......................1.98 MPH
Track Motors	10.6 cubic inch displacement, rated at over 3500 PSI
Instrumentation	Oil Temperature
Chain Sprockets	Induction Hardened
Track Sprockets	Furnace Hardened
Track Guide Rollers	9 in dia., 1/4 in flanges, unhardened (2) per side
Track Chain	Double lengths #550 Chain, 22,500 lbs tensile strength per track
Track Shoes	9-1/2 in wide, 7/16 in overall laminated thickness, Grouser & Non-marking style options...replaceable
Final Drive Chain	No. 80, 18,959 lbs tensile strength
Axle Diameter	7/8 in dia. on idlers, 1-3/16 in dia. on Track Sprockets
Service Brake	Dual 8" diameter disk type
Technical specifications represent best possible performance based on a 25HP engine operating at 3600 RPM. Assumes all drive components are at 100% efficiency. Results will vary due to changes in operating speeds, component wear, oil temperature, track shoe style, ground conditions, etc. Specifications are subject to change without notice or obligation.

C.F. Struck Corporation - PO Box 307 - Cedarburg, WI - 53012
Phone: 262-377-3300	Fax: 262-377-9247	Email: info@struckcorp.com