Magnatrac HYDRO 7000 Specifications

A - 55-3/4"

 

B - 60"

 

C - 43-3/4"

 

D - 15-1/8"

 

E - 48-7/8"

 

F - 9-1/2"

 

G - 6"

Engine	31HP Briggs & Stratton Vanguard, 'V' twin cylinders, electric start, 20 amp alternator, pressure lubrication with filter
Gas Tank	Remote with fuel pump, 4.5 gal. capacity
Track Drive Pump	1.01 cubic inch displacement, 15.7 GPM @ 3600 RPM
Attachment Pump	0.500 cubic inch displacement, 7.8 GPM @ 3600 RPM
Max Engine Torque	48 ft. lbs @ 2400 RPM
Hydraulic Oil Cooler	Externally mounted, electric fan cooled, cools attachment and track hydraulic oil, rated 27.5 GPM
Attachment Valve	4 Spool sectional [Overdrive + 3 aux. spools] - expandable to 6 spools
Approximate Speeds	Regular Drive......................2.4 MPH Overdrive (continuoous use)....3.5 MPH
Track Motors	10.6 cubic inch displacement, rated at over 3500 PSI
Instrumentation	Amp, Hour, Temp. gauges,
Chain Sprockets	Induction Hardened
Track Sprockets	Rear Drives - AR200 hardened plate steel, Front idler sprockets - A36 plate steel
Track Guide Rollers	4-1/2" diameter, 5/8" thick flanges, A400 hardened steel, (4) per side
Track Chain	Double lengths #557 Chain, 33,000 lbs tensile strength per track (heavy track - 40,000 lbs optional)
Track Shoes	9-1/2 in wide, 7/16 in overall laminated thickness, Grouser & Non-marking style options...replaceable
Final Drive Chain	No. S80HK, 22,046 lbs tensile strength
Axle Diameter	7/8 in dia. on idlers, 1-3/16 in dia. on Track Sprockets
Service Brake	Dual 8" diameter disk type
Technical specifications represent best possible performance based on a 31HP engine operating at 3600 RPM. Assumes all drive components are at 100% efficiency. Results will vary due to changes in operating speeds, component wear, oil temperature, track shoe style, ground conditions, etc. Specifications are subject to change without notice or obligation.

C.F. Struck Corporation - PO Box 307 - Cedarburg, WI - 53012
Phone: 262-377-3300	Fax: 262-377-9247	Email: info@struckcorp.com